mb/starlabs/starbook/adl: Update EC binary to 1.13

1.13
	Increase the charging speed to 1C when temperatures allow
	Reduce the amount of variables polled via the SMBus
	Fixed an issue when batteries would not exit shipping mode

1.12
	Revert the charging rate to 0.5C
	Store the state of charging at 0xa0

1.11
	Adjust the threshold for Hybrid Power to 1536MA
	Adjust the threshold for Hybrid Power to be disable to 5 percent RSOC

1.10
	Disable Hybrid Power when the RSOC is less than 20 percent
	Only enable LEARN once when RSOC is greater than 50 percent
	Dont query unused registers on the BQ24780S

1.07
	Disable PD requests when a normal USB-C device is connected
	Account for having two chargers connected
	Optimise the charging calculations

1.06
	Strip PD responses to only include valid bits

1.05
	Fix the charging voltage to 13.2V
	Only call Anx when USB-C PD chargers are connected
	Disable Hybrid-Power when charging current is less that 1536

1.04
	Store power related variables in the EC RAM and mirror them to EC memory
	to avoid memory overflow to mitigate some strange behaviours when the EC
	memory overflows

1.03
	Improved the reliability of DC Jack charging by modifying it to 800MHz, 3A
	Avoided charging stalling by continuously polling the SMBus after overcharge
	protection is active
	Exposed the behavior of overcharge protection to APCI
	Set the charge LED to purple when overcharge protection is active
	Modified fan curve
	Ensured the trackpad is in the desired state by polling its state every 10ms
	Set the brightness of the keyboard backlight to the maximum
	Streamlined the system by removing unused SMM events

Signed-off-by: Sean Rhodes <[email protected]>
Change-Id: I3b08cb8b2b4e9e9836cd7e8c545fc83b2e0e3f99

Author: Sean-StarLabs