Merge pull request MicrosoftDocs#11783 from MicrosoftDocs/main

Publish main to live 04/26/2024, 3:30 PM

Author: garycentric

exchange/exchange-ps/exchange/Add-IPAllowListEntry.md

@@ -137,7 +137,7 @@ Accept wildcard characters: False
 ### -ExpirationTime
 The ExpirationTime parameter specifies a day and time when the IP Allow list entry that you're creating will expire. If you specify a time only and you don't specify a date, the current day is assumed.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: DateTime

exchange/exchange-ps/exchange/Add-IPBlockListEntry.md

@@ -136,7 +136,7 @@ Accept wildcard characters: False
 ### -ExpirationTime
 The ExpirationTime parameter specifies a day and time when the IP Block list entry that you're creating will expire. If you specify a time only and you don't specify a date, the current day is assumed.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: DateTime

exchange/exchange-ps/exchange/Add-ResubmitRequest.md

@@ -66,7 +66,7 @@ This example replays the redundant copies of messages delivered from 6:00 PM Jun
 ### -EndTime
 The EndTime parameter specifies the delivery time of the latest messages that need to be resubmitted from Safety Net.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 The date and time specified by the EndTime parameter must be later than the date and time specified by the StartTime parameter. The date and time specified by both parameters must be in the past.
 
@@ -86,7 +86,7 @@ Accept wildcard characters: False
 ### -StartTime
 The StartTime parameter specifies the delivery time of the oldest messages that need to be resubmitted from Safety Net.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 The date and time specified by the StartTime parameter must be earlier than the date and time specified by the EndTime parameter. The date and time specified by both parameters must be in the past.
 

exchange/exchange-ps/exchange/Export-ActivityExplorerData.md

@@ -92,7 +92,7 @@ This example exports up to 100 records for the specified date range in JSON form
 ### -EndTime
 The EndTime parameter specifies the end date of the date range.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: DateTime
@@ -130,7 +130,7 @@ Accept wildcard characters: False
 ### -StartTime
 The StartTime parameter specifies the start date of the date range.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: DateTime

exchange/exchange-ps/exchange/Get-ATPTotalTrafficReport.md

@@ -142,7 +142,7 @@ Accept wildcard characters: False
 ### -EndDate
 The EndDate parameter specifies the end date of the date range.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: System.DateTime
@@ -208,7 +208,7 @@ Accept wildcard characters: False
 ### -StartDate
 The StartDate parameter specifies the start date of the date range.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: System.DateTime

exchange/exchange-ps/exchange/Get-AgentLog.md

@@ -45,7 +45,7 @@ This example returns a report that has statistics collected between 09:00 (9 A.M
 ### -EndDate
 The EndDate parameter specifies the end date of the date range.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: DateTime
@@ -79,7 +79,7 @@ Accept wildcard characters: False
 ### -StartDate
 The StartDate parameter specifies the start date of the date range.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: DateTime

exchange/exchange-ps/exchange/Get-AggregateZapReport.md

@@ -59,7 +59,7 @@ This example retrieves information for the specified date range.
 ### -EndDate
 The EndDate parameter specifies the end date of the date range.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only. If you enter the date, enclose the value in quotation marks ("), for example, "09/01/2018".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only. If you enter the date, enclose the value in quotation marks ("), for example, "09/01/2018".
 
 If you use the EndDate parameter, you also need to use the StartDate parameter.
 
@@ -111,7 +111,7 @@ Accept wildcard characters: False
 ### -StartDate
 The StartDate parameter specifies the start date of the date range.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018".
 
 If you use this parameter, you also need to use the StartDate parameter.
 

exchange/exchange-ps/exchange/Get-AuditLogSearch.md

@@ -71,7 +71,7 @@ Accept wildcard characters: False
 ### -CreatedAfter
 The CreatedAfter parameter filters the results to audit log searches that were created after the specified date.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: ExDateTime
@@ -89,7 +89,7 @@ Accept wildcard characters: False
 ### -CreatedBefore
 The CreatedBefore parameter filters the results to audit log searches that were created before the specified date.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: ExDateTime

exchange/exchange-ps/exchange/Get-CalendarDiagnosticLog.md

@@ -283,7 +283,7 @@ Accept wildcard characters: False
 ### -EndDate
 The EndDate parameter specifies the end date of the date range.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: ExDateTime
@@ -430,7 +430,7 @@ Accept wildcard characters: False
 ### -StartDate
 The StartDate parameter specifies the start date of the date range.
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: ExDateTime

exchange/exchange-ps/exchange/Get-CalendarDiagnosticObjects.md

@@ -188,7 +188,7 @@ Accept wildcard characters: False
 ### -EndDate
 The EndDate parameter specifies the end date of the date range for the OriginalLastModifiedTime property (when the meeting was last modified, not created).
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: ExDateTime
@@ -429,7 +429,7 @@ Accept wildcard characters: False
 ### -StartDate
 The StartDate parameter specifies the start date of the date range for the OriginalLastModifiedTime property (when the meeting was last modified, not created).
 
-Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
+Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
 
 ```yaml
 Type: ExDateTime