This lab runs a standalone vQFX making some OSPFv3 adjacencies and also acting as a switch (IRB) on two interfaces.
The PFE is from the Vagrant package for VirtualBox. You need to extract the qcow image from it. However, the RE is from the non-Vagrant package. The Vagrant package has its RE with autoconfiguration disabled...
Default passwords for root are "no" for the PFE and "Juniper" for the RE.
You can check everything works as expected, from R1:
$ ip -6 route show
2001:db8::/64 dev eth0 proto kernel metric 256 pref medium
2001:db8:aaaa::/64 dev eth1 proto kernel metric 256 pref medium
2001:db8:b00c::77 via fe80::205:86ff:fe71:1c03 dev eth0 proto bird metric 1024 pref medium
2001:db8:dead::200 via fe80::5254:33ff:fe00:b dev eth0 proto bird metric 1024 pref medium
2001:db8:c0ff::42 dev dummy0 proto kernel metric 256 pref medium
From the vQFX:
root> show ospf3 neighbor
ID Interface State Pri Dead
2.2.2.2 xe-0/0/0.0 Full 1 36
Neighbor-address fe80::5254:33ff:fe00:b
1.1.1.1 xe-0/0/0.0 Full 1 35
Neighbor-address fe80::5254:33ff:fe00:9
From R1, we can ping R2:
$ ping -c3 2001:db8:aaaa::2
PING 2001:db8:aaaa::2(2001:db8:aaaa::2) 56 data bytes
64 bytes from 2001:db8:aaaa::2: icmp_seq=1 ttl=64 time=16.3 ms
64 bytes from 2001:db8:aaaa::2: icmp_seq=2 ttl=64 time=6.05 ms
64 bytes from 2001:db8:aaaa::2: icmp_seq=3 ttl=64 time=6.39 ms
--- 2001:db8:aaaa::2 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 6.051/9.607/16.380/4.792 ms
And we can ping the vQFX:
$ ping -c3 2001:db8:aaaa::3
PING 2001:db8:aaaa::3(2001:db8:aaaa::3) 56 data bytes
64 bytes from 2001:db8:aaaa::3: icmp_seq=1 ttl=64 time=19.2 ms
64 bytes from 2001:db8:aaaa::3: icmp_seq=2 ttl=64 time=8.66 ms
64 bytes from 2001:db8:aaaa::3: icmp_seq=3 ttl=64 time=7.70 ms
--- 2001:db8:aaaa::3 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 7.700/11.874/19.261/5.238 ms