Move to use ERROR STOP instead of ABORT

OpenMathLib · martin-frbg · Dec 4, 2024 · Nov 26, 2024 · Nov 26, 2024 · Dec 4, 2024
commit d3b2036d49c16cb9f7520d3ee5d3d39d349c18bf
diff --git a/ctest/c_cblat1.f b/ctest/c_cblat1.f
@@ -41,7 +41,7 @@ PROGRAM CCBLAT1
          IF (PASS) THEN
             WRITE (NOUT,99998)
          ELSE
-            CALL ABORT
+            ERROR STOP
         END IF
    20 CONTINUE
 *
@@ -231,7 +231,7 @@ SUBROUTINE CHECK1(SFAC)
                CALL ITEST1(ICAMAXTEST(N,CX,INCX),ITRUE3(NP1))
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK1'
-               CALL ABORT
+               ERROR STOP
             END IF
 *
    40    CONTINUE
@@ -515,7 +515,7 @@ SUBROUTINE CHECK2(SFAC)
                CALL CTEST(LENY,CY,CT10Y(1,KN,KI),CSIZE3,1.0E0)
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK2'
-               CALL ABORT
+               ERROR STOP
             END IF
 *
    40    CONTINUE

diff --git a/ctest/c_cblat2.f b/ctest/c_cblat2.f
@@ -10,7 +10,7 @@ PROGRAM CBLAT2
 *  'CBLAT2.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
+*  F        LOGICAL FLAG, T TO ERROR STOP ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -243,7 +243,7 @@ PROGRAM CBLAT2
      $      GO TO 70
    60 CONTINUE
       WRITE( NOUT, FMT = 9986 )SNAMET
-      CALL ABORT
+      ERROR STOP
    70 LTEST( I ) = LTESTT
       GO TO 50
 *
@@ -283,15 +283,15 @@ PROGRAM CBLAT2
       SAME = LCE( YY, YT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9985 )TRANS, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
       TRANS = 'T'
       CALL CMVCH( TRANS, N, N, ONE, A, NMAX, X, -1, ZERO, Y, -1, YT, G,
      $            YY, EPS, ERR, FATAL, NOUT, .TRUE. )
       SAME = LCE( YY, YT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9985 )TRANS, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
 *
 *     Test each subroutine in turn.
@@ -419,7 +419,7 @@ PROGRAM CBLAT2
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
       IF( FATAL ) THEN
-         CALL ABORT
+         ERROR STOP
       END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )

diff --git a/ctest/c_cblat3.f b/ctest/c_cblat3.f
@@ -10,7 +10,7 @@ PROGRAM CBLAT3
 *  'CBLAT3.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
+*  F        LOGICAL FLAG, T TO ERROR STOP ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -194,7 +194,7 @@ PROGRAM CBLAT3
      $      GO TO 50
    40 CONTINUE
       WRITE( NOUT, FMT = 9990 )SNAMET
-      CALL ABORT
+      ERROR STOP
    50 LTEST( I ) = LTESTT
       GO TO 30
 *
@@ -237,7 +237,7 @@ PROGRAM CBLAT3
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
       TRANSB = 'C'
       CALL CMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -246,7 +246,7 @@ PROGRAM CBLAT3
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
       DO 120 J = 1, N
          AB( J, NMAX + 1 ) = N - J + 1
@@ -264,7 +264,7 @@ PROGRAM CBLAT3
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
       TRANSB = 'C'
       CALL CMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -273,7 +273,7 @@ PROGRAM CBLAT3
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
 *
 *     Test each subroutine in turn.
@@ -386,7 +386,7 @@ PROGRAM CBLAT3
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
       IF( FATAL ) THEN
-         CALL ABORT
+         ERROR STOP
       END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )

diff --git a/ctest/c_cblat3_3m.f b/ctest/c_cblat3_3m.f
@@ -10,7 +10,7 @@ PROGRAM CBLAT3
 *  'CBLAT3.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
+*  F        LOGICAL FLAG, T TO ERROR STOP ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -194,7 +194,7 @@ PROGRAM CBLAT3
      $      GO TO 50
    40 CONTINUE
       WRITE( NOUT, FMT = 9990 )SNAMET
-      CALL ABORT
+      ERROR STOP
    50 LTEST( I ) = LTESTT
       GO TO 30
 *
@@ -237,7 +237,7 @@ PROGRAM CBLAT3
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
       TRANSB = 'C'
       CALL CMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -246,7 +246,7 @@ PROGRAM CBLAT3
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
       DO 120 J = 1, N
          AB( J, NMAX + 1 ) = N - J + 1
@@ -264,7 +264,7 @@ PROGRAM CBLAT3
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
       TRANSB = 'C'
       CALL CMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -273,7 +273,7 @@ PROGRAM CBLAT3
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
 *
 *     Test each subroutine in turn.
@@ -386,7 +386,7 @@ PROGRAM CBLAT3
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
       IF( FATAL ) THEN
-         CALL ABORT
+         ERROR STOP
       END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )

diff --git a/ctest/c_dblat1.f b/ctest/c_dblat1.f
@@ -47,7 +47,7 @@ PROGRAM DCBLAT1
          IF (PASS) THEN
             WRITE (NOUT,99998)
          ELSE
-            CALL ABORT
+            ERROR STOP
         END IF
    20 CONTINUE
 *
@@ -139,7 +139,7 @@ SUBROUTINE CHECK0(SFAC)
             CALL STEST1(SS,DS1(K),DS1(K),SFAC)
          ELSE
             WRITE (NOUT,*) ' Shouldn''t be here in CHECK0'
-            CALL ABORT
+            ERROR STOP
          END IF
    20 CONTINUE
    40 RETURN
@@ -232,7 +232,7 @@ SUBROUTINE CHECK1(SFAC)
                CALL ITEST1(IDAMAXTEST(N,SX,INCX),ITRUE2(NP1))
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK1'
-               CALL ABORT
+               ERROR STOP
             END IF
    60    CONTINUE
    80 CONTINUE
@@ -387,7 +387,7 @@ SUBROUTINE CHECK2(SFAC)
                CALL STEST(LENY,SY,STY,SSIZE2(1,1),1.0D0)
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK2'
-               CALL ABORT
+               ERROR STOP
             END IF
   100    CONTINUE
   120 CONTINUE
@@ -475,7 +475,7 @@ SUBROUTINE CHECK3(SFAC)
    70          CONTINUE      
                ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK3'
-               CALL ABORT
+               ERROR STOP
             END IF
    40    CONTINUE
    60 CONTINUE

diff --git a/ctest/c_dblat2.f b/ctest/c_dblat2.f
@@ -10,7 +10,7 @@ PROGRAM DBLAT2
 *  'DBLAT2.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
+*  F        LOGICAL FLAG, T TO ERROR STOP ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -239,7 +239,7 @@ PROGRAM DBLAT2
      $      GO TO 70
    60 CONTINUE
       WRITE( NOUT, FMT = 9986 )SNAMET
-      CALL ABORT
+      ERROR STOP
    70 LTEST( I ) = LTESTT
       GO TO 50
 *
@@ -279,15 +279,15 @@ PROGRAM DBLAT2
       SAME = LDE( YY, YT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9985 )TRANS, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
       TRANS = 'T'
       CALL DMVCH( TRANS, N, N, ONE, A, NMAX, X, -1, ZERO, Y, -1, YT, G,
      $            YY, EPS, ERR, FATAL, NOUT, .TRUE. )
       SAME = LDE( YY, YT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9985 )TRANS, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
 *
 *     Test each subroutine in turn.
@@ -415,7 +415,7 @@ PROGRAM DBLAT2
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
       IF( FATAL ) THEN
-         CALL ABORT
+         ERROR STOP
       END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )

diff --git a/ctest/c_dblat3.f b/ctest/c_dblat3.f
@@ -10,7 +10,7 @@ PROGRAM DBLAT3
 *  'DBLAT3.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
+*  F        LOGICAL FLAG, T TO ERROR STOP ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -189,7 +189,7 @@ PROGRAM DBLAT3
      $      GO TO 50
    40 CONTINUE
       WRITE( NOUT, FMT = 9990 )SNAMET
-      CALL ABORT
+      ERROR STOP
    50 LTEST( I ) = LTESTT
       GO TO 30
 *
@@ -232,7 +232,7 @@ PROGRAM DBLAT3
       SAME = LDE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
       TRANSB = 'T'
       CALL DMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -241,7 +241,7 @@ PROGRAM DBLAT3
       SAME = LDE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
       DO 120 J = 1, N
          AB( J, NMAX + 1 ) = N - J + 1
@@ -259,7 +259,7 @@ PROGRAM DBLAT3
       SAME = LDE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
       TRANSB = 'T'
       CALL DMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -268,7 +268,7 @@ PROGRAM DBLAT3
       SAME = LDE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         CALL ABORT
+         ERROR STOP
       END IF
 *
 *     Test each subroutine in turn.
@@ -380,7 +380,7 @@ PROGRAM DBLAT3
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
       IF( FATAL ) THEN
-         CALL ABORT
+         ERROR STOP
       END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )

diff --git a/ctest/c_sblat1.f b/ctest/c_sblat1.f
@@ -47,7 +47,7 @@ PROGRAM SCBLAT1
          IF (PASS) THEN
             WRITE (NOUT,99998)
          ELSE
-            CALL ABORT
+            ERROR STOP
         END IF
    20 CONTINUE
 *
@@ -139,7 +139,7 @@ SUBROUTINE CHECK0(SFAC)
             CALL STEST1(SS,DS1(K),DS1(K),SFAC)
          ELSE
             WRITE (NOUT,*) ' Shouldn''t be here in CHECK0'
-            CALL ABORT
+            ERROR STOP
          END IF
    20 CONTINUE
    40 RETURN
@@ -232,7 +232,7 @@ SUBROUTINE CHECK1(SFAC)
                CALL ITEST1(ISAMAXTEST(N,SX,INCX),ITRUE2(NP1))
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK1'
-               CALL ABORT
+               ERROR STOP
             END IF
    60    CONTINUE
    80 CONTINUE
@@ -387,7 +387,7 @@ SUBROUTINE CHECK2(SFAC)
                CALL STEST(LENY,SY,STY,SSIZE2(1,1),1.0E0)
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK2'
-               CALL ABORT
+               ERROR STOP
             END IF
   100    CONTINUE
   120 CONTINUE
@@ -482,7 +482,7 @@ SUBROUTINE CHECK3(SFAC)
    70          CONTINUE
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK3'
-               CALL ABORT
+               ERROR STOP
             END IF
    40    CONTINUE
    60 CONTINUE