add Nordic LED Button example

libraries/Bluefruit52Lib/examples/Peripheral/nrf_blinky/nrf_blinky.ino

@@ -0,0 +1,221 @@
+/*********************************************************************
+ This is an example for our nRF52 based Bluefruit LE modules
+
+ Pick one up today in the adafruit shop!
+
+ Adafruit invests time and resources providing this open source code,
+ please support Adafruit and open-source hardware by purchasing
+ products from Adafruit!
+
+ MIT license, check LICENSE for more information
+ All text above, and the splash screen below must be included in
+ any redistribution
+*********************************************************************/
+
+/* This sketch implement part of Nordic custom LED Button Service (LBS).
+ * Install "nRF Blinky" app on your Android/iOS to control the on-board LED
+ * - https://apps.apple.com/us/app/nrf-blinky/id1325014347
+ * - https://play.google.com/store/apps/details?id=no.nordicsemi.android.nrfblinky
+ */
+
+#include <bluefruit.h>
+
+// max concurrent connections supported by this example
+#define MAX_PRPH_CONNECTION   2
+uint8_t connection_count = 0;
+
+/* HRM Service Definitions
+ * Heart Rate Monitor Service:  0x180D
+ * Heart Rate Measurement Char: 0x2A37
+ * Body Sensor Location Char:   0x2A38
+ */
+BLEService        hrms = BLEService(UUID16_SVC_HEART_RATE);
+BLECharacteristic hrmc = BLECharacteristic(UUID16_CHR_HEART_RATE_MEASUREMENT);
+BLECharacteristic bslc = BLECharacteristic(UUID16_CHR_BODY_SENSOR_LOCATION);
+
+/* LBS Service: 00001523-1212-EFDE-1523-785FEABCD123
+ * LBS Button : 00001524-1212-EFDE-1523-785FEABCD123
+ * LBS LED    : 00001525-1212-EFDE-1523-785FEABCD123
+ */
+
+const uint8_t LBS_UUID_SERVICE[] =
+{
+    0x23, 0xD1, 0xBC, 0xEA, 0x5F, 0x78, 0x23, 0x15,
+    0xDE, 0xEF, 0x12, 0x12, 0x23, 0x15, 0x00, 0x00
+};
+
+const uint8_t LBS_UUID_CHR_BUTTON[] =
+{
+    0x23, 0xD1, 0xBC, 0xEA, 0x5F, 0x78, 0x23, 0x15,
+    0xDE, 0xEF, 0x12, 0x12, 0x24, 0x15, 0x00, 0x00
+};
+
+const uint8_t LBS_UUID_CHR_LED[] =
+{
+    0x23, 0xD1, 0xBC, 0xEA, 0x5F, 0x78, 0x23, 0x15,
+    0xDE, 0xEF, 0x12, 0x12, 0x25, 0x15, 0x00, 0x00
+};
+
+BLEService        lbs(LBS_UUID_SERVICE);
+BLECharacteristic lsbButton(LBS_UUID_CHR_BUTTON);
+BLECharacteristic lsbLED(LBS_UUID_CHR_LED);
+
+// Use on-board button if available, else use A0 pin
+#ifdef PIN_BUTTON1
+uint8_t button = PIN_BUTTON1;
+#else
+uint8_t button = A0;
+#endif
+
+uint8_t buttonState;
+
+void setup()
+{
+  pinMode(LED_BUILTIN, OUTPUT);
+  digitalWrite(LED_BUILTIN, 1-LED_STATE_ON); // led off
+
+  pinMode(button, INPUT_PULLUP);
+  buttonState = (uint8_t) (1-digitalRead(button)); // button is active LOW
+
+  Serial.begin(115200);
+  //while ( !Serial ) delay(10);   // for nrf52840 with native usb
+
+  Serial.println("Bluefruit52 nRF Blinky Example");
+  Serial.println("------------------------------\n");
+
+  // Initialize Bluefruit with max concurrent connections as Peripheral = MAX_PRPH_CONNECTION, Central = 0
+  Serial.println("Initialise the Bluefruit nRF52 module");
+  Bluefruit.begin(MAX_PRPH_CONNECTION, 0);
+  Bluefruit.Periph.setConnectCallback(connect_callback);
+  Bluefruit.Periph.setDisconnectCallback(disconnect_callback);
+
+  // Setup the LED-Button service using
+  Serial.println("Configuring the LED-Button Service");
+
+  // Note: You must call .begin() on the BLEService before calling .begin() on
+  // any characteristic(s) within that service definition.. Calling .begin() on
+  // a BLECharacteristic will cause it to be added to the last BLEService that
+  // was 'begin()'ed!
+  lbs.begin();
+
+  // Configure Button characteristic
+  // Properties = Read + Notify
+  // Permission = Open to read, cannot write
+  // Fixed Len  = 1 (button state)
+  lsbButton.setProperties(CHR_PROPS_READ | CHR_PROPS_NOTIFY);
+  lsbButton.setPermission(SECMODE_OPEN, SECMODE_NO_ACCESS);
+  lsbButton.setFixedLen(1);
+  lsbButton.begin();
+  lsbButton.write8(buttonState);
+
+  // Configure the LED characteristic
+  // Properties = Read + Write
+  // Permission = Open to read, Open to write
+  // Fixed Len  = 1 (LED state)
+  lsbLED.setProperties(CHR_PROPS_READ | CHR_PROPS_WRITE);
+  lsbLED.setPermission(SECMODE_OPEN, SECMODE_OPEN);
+  lsbLED.setFixedLen(1);
+  lsbLED.begin();
+  lsbLED.write8(0x00); // led = off
+
+  lsbLED.setWriteCallback(led_write_callback);
+
+  // Setup the advertising packet(s)
+  Serial.println("Setting up the advertising");
+  startAdv();
+}
+
+void startAdv(void)
+{
+  // Advertising packet
+  Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
+  Bluefruit.Advertising.addTxPower();
+
+  // Include HRM Service UUID
+  Bluefruit.Advertising.addService(lbs);
+
+  // Secondary Scan Response packet (optional)
+  // Since there is no room for 'Name' in Advertising packet
+  Bluefruit.ScanResponse.addName();
+
+  /* Start Advertising
+   * - Enable auto advertising if disconnected
+   * - Interval:  fast mode = 20 ms, slow mode = 152.5 ms
+   * - Timeout for fast mode is 30 seconds
+   * - Start(timeout) with timeout = 0 will advertise forever (until connected)
+   * 
+   * For recommended advertising interval
+   * https://developer.apple.com/library/content/qa/qa1931/_index.html   
+   */
+  Bluefruit.Advertising.restartOnDisconnect(true);
+  Bluefruit.Advertising.setInterval(32, 244);    // in unit of 0.625 ms
+  Bluefruit.Advertising.setFastTimeout(30);      // number of seconds in fast mode
+  Bluefruit.Advertising.start(0);                // 0 = Don't stop advertising after n seconds  
+}
+
+void led_write_callback(uint16_t conn_hdl, BLECharacteristic* chr, uint8_t* data, uint16_t len)
+{
+  (void) conn_hdl;
+  (void) chr;
+  (void) len; // len should be 1
+
+  // data = 1 -> LED = On
+  // data = 0 -> LED = Off
+  digitalWrite(LED_BUILTIN, data[0] ? LED_STATE_ON : (1-LED_STATE_ON));
+}
+
+void loop()
+{
+  delay(10); // poll button every 10 ms
+
+  uint8_t newState = (uint8_t) (1-digitalRead(button)); // button is active LOW
+
+  // only notify if button state chagnes
+  if ( newState != buttonState)
+  {
+    buttonState = newState;
+    lsbButton.write8(buttonState);
+
+    // notify all connected clients
+    for (uint16_t conn_hdl=0; conn_hdl < MAX_PRPH_CONNECTION; conn_hdl++)
+    {
+      if ( Bluefruit.connected(conn_hdl) && lsbButton.notifyEnabled(conn_hdl) )
+      {
+        lsbButton.notify8(conn_hdl, buttonState);
+      }
+    }
+  }
+}
+
+// callback invoked when central connects
+void connect_callback(uint16_t conn_handle)
+{
+  (void) conn_handle;
+
+  connection_count++;
+  Serial.print("Connection count: ");
+  Serial.println(connection_count);
+
+  // Keep advertising if not reaching max
+  if (connection_count < MAX_PRPH_CONNECTION)
+  {
+    Serial.println("Keep advertising");
+    Bluefruit.Advertising.start(0);
+  }
+}
+
+/**
+ * Callback invoked when a connection is dropped
+ * @param conn_handle connection where this event happens
+ * @param reason is a BLE_HCI_STATUS_CODE which can be found in ble_hci.h
+ */
+void disconnect_callback(uint16_t conn_handle, uint8_t reason)
+{
+  (void) conn_handle;
+  (void) reason;
+
+  Serial.println();
+  Serial.print("Disconnected, reason = 0x"); Serial.println(reason, HEX);
+
+  connection_count--;
+}

variants/feather_nrf52840_express/variant.h

@@ -55,13 +55,10 @@ extern "C"
 
 #define LED_STATE_ON         1         // State when LED is litted
 
-// Buttons
 /*
-#define PIN_BUTTON1             (2)
-#define PIN_BUTTON2             (3)
-#define PIN_BUTTON3             (4)
-#define PIN_BUTTON4             (5)
-*/
+ * Buttons
+ */
+#define PIN_BUTTON1             (7)
 
 /*
  * Analog pins

variants/metro_nrf52840_express/variant.h

@@ -55,13 +55,11 @@ extern "C"
 
 #define LED_STATE_ON         1         // State when LED is litted
 
-// Buttons
 /*
-#define PIN_BUTTON1             (2)
-#define PIN_BUTTON2             (3)
-#define PIN_BUTTON3             (4)
-#define PIN_BUTTON4             (5)
-*/
+ * Buttons
+ */
+#define PIN_BUTTON1             (37)
+#define PIN_BUTTON2             (36)
 
 /*
  * Analog pins

variants/pca10056/variant.h

@@ -54,6 +54,14 @@ extern "C"
 
 #define LED_STATE_ON         0         // State when LED is litted
 
+/*
+ * Buttons
+ */
+#define PIN_BUTTON1          11
+#define PIN_BUTTON2          12
+#define PIN_BUTTON3          24
+#define PIN_BUTTON4          25
+
 /*
  * Analog pins
  */

variants/raytac_mdbt50q_rx/variant.h

@@ -54,6 +54,11 @@ extern "C"
 
 #define LED_STATE_ON         0         // State when LED is litted
 
+/*
+ * Buttons
+ */
+#define PIN_BUTTON1          2
+
 #define PIN_DFU              2
 
 // Buttons