[SPARK-32493][INFRA] Manually install R instead of using setup-r in GitHub Actions #29302
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
cloud-fan
approved these changes
Jul 30, 2020
Member
Author
|
Thanks @cloud-fan. I am going to merge to unlock other PRs. Merged to master. |
Member
|
Thanks for the fix, @HyukjinKwon . BTW, is this a temporal fix? Why don't we try to specify the version like
Technically, we have experienced that this manual installation was flakier time to time. At least, |
Member
Author
|
Yeah, it is rather a temporary fix. I couldn't find a way to properly set. I tried to explicitly set the different |
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 18, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 19, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 19, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 19, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 19, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 19, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 19, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 19, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
HyukjinKwon
added a commit
to HyukjinKwon/spark
that referenced
this pull request
Aug 19, 2020
…itHub Actions This PR proposes to manually install R instead of using `setup-r` which seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073. While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release. To recover GitHub Actions build. No, dev-only Manually tested at #15 Closes apache#29302 from HyukjinKwon/SPARK-32493. Authored-by: HyukjinKwon <[email protected]> Signed-off-by: HyukjinKwon <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
3 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
What changes were proposed in this pull request?
This PR proposes to manually install R instead of using
setup-rwhich seems broken. Currently, GitHub Actions uses its default R 3.4.4 installed, which we dropped as of SPARK-32073.While I am here, I am also upgrading R version to 4.0. Jenkins will test the old version and GitHub Actions tests the new version. AppVeyor uses R 4.0 but it does not check CRAN which is important when we make a release.
Why are the changes needed?
To recover GitHub Actions build.
Does this PR introduce any user-facing change?
No, dev-only
How was this patch tested?
Manually tested at HyukjinKwon#15