Fix WebClient example

libraries/Ethernet/examples/WebClient/WebClient.ino

@@ -14,21 +14,21 @@
 
  */
 
+#include <PortentaEthernet.h>
 #include <SPI.h>
-#include <Ethernet.h>
 
 // Enter a MAC address for your controller below.
 // Newer Ethernet shields have a MAC address printed on a sticker on the shield
-byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
+// byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
 
 // if you don't want to use DNS (and reduce your sketch size)
 // use the numeric IP instead of the name for the server:
 //IPAddress server(74,125,232,128);  // numeric IP for Google (no DNS)
-char server[] = "www.google.com";    // name address for Google (using DNS)
+char server[] = "www.google.com"; // name address for Google (using DNS)
 
 // Set the static IP address to use if the DHCP fails to assign
-IPAddress ip(192, 168, 0, 177);
-IPAddress myDns(192, 168, 0, 1);
+IPAddress ip(192, 168, 2, 177);
+IPAddress myDns(192, 168, 2, 1);
 
 // Initialize the Ethernet client library
 // with the IP address and port of the server
@@ -38,100 +38,95 @@ EthernetClient client;
 // Variables to measure the speed
 unsigned long beginMicros, endMicros;
 unsigned long byteCount = 0;
-bool printWebData = true;  // set to false for better speed measurement
-
-void setup() {
-  // You can use Ethernet.init(pin) to configure the CS pin
-  //Ethernet.init(10);  // Most Arduino shields
-  //Ethernet.init(5);   // MKR ETH shield
-  //Ethernet.init(0);   // Teensy 2.0
-  //Ethernet.init(20);  // Teensy++ 2.0
-  //Ethernet.init(15);  // ESP8266 with Adafruit Featherwing Ethernet
-  //Ethernet.init(33);  // ESP32 with Adafruit Featherwing Ethernet
-
-  // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for native USB port only
-  }
-
-  // start the Ethernet connection:
-  Serial.println("Initialize Ethernet with DHCP:");
-  if (Ethernet.begin(mac) == 0) {
-    Serial.println("Failed to configure Ethernet using DHCP");
-    // Check for Ethernet hardware present
-    if (Ethernet.hardwareStatus() == EthernetNoHardware) {
-      Serial.println("Ethernet shield was not found.  Sorry, can't run without hardware. :(");
-      while (true) {
-        delay(1); // do nothing, no point running without Ethernet hardware
-      }
+bool printWebData = true; // set to false for better speed measurement
+
+void setup()
+{
+
+    // Open serial communications and wait for port to open:
+    Serial.begin(9600);
+    while (!Serial) {
+        ; // wait for serial port to connect. Needed for native USB port only
+    }
+
+    // start the Ethernet connection:
+    Serial.println("Initialize Ethernet with DHCP:");
+    if (Ethernet.begin() == 0) {
+        Serial.println("Failed to configure Ethernet using DHCP");
+        // Check for Ethernet hardware present
+        if (Ethernet.hardwareStatus() == EthernetNoHardware) {
+            Serial.println("Ethernet shield was not found.  Sorry, can't run without hardware. :(");
+            while (true) {
+                delay(1); // do nothing, no point running without Ethernet hardware
+            }
+        }
+        if (Ethernet.linkStatus() == LinkOFF) {
+            Serial.println("Ethernet cable is not connected.");
+        }
+        // try to congifure using IP address instead of DHCP:
+        Ethernet.begin(ip, myDns);
+    } else {
+        Serial.print("  DHCP assigned IP ");
+        Serial.println(Ethernet.localIP());
     }
-    if (Ethernet.linkStatus() == LinkOFF) {
-      Serial.println("Ethernet cable is not connected.");
+    // give the Ethernet shield a second to initialize:
+    delay(1000);
+    Serial.print("connecting to ");
+    Serial.print(server);
+    Serial.println("...");
+
+    // if you get a connection, report back via serial:
+    if (client.connect(server, 80)) {
+        Serial.print("connected to ");
+        Serial.println(client.remoteIP());
+        // Make a HTTP request:
+        client.println("GET /search?q=arduino HTTP/1.1");
+        client.println("Host: www.google.com");
+        client.println("Connection: close");
+        client.println();
+    } else {
+        // if you didn't get a connection to the server:
+        Serial.println("connection failed");
     }
-    // try to congifure using IP address instead of DHCP:
-    Ethernet.begin(mac, ip, myDns);
-  } else {
-    Serial.print("  DHCP assigned IP ");
-    Serial.println(Ethernet.localIP());
-  }
-  // give the Ethernet shield a second to initialize:
-  delay(1000);
-  Serial.print("connecting to ");
-  Serial.print(server);
-  Serial.println("...");
-
-  // if you get a connection, report back via serial:
-  if (client.connect(server, 80)) {
-    Serial.print("connected to ");
-    Serial.println(client.remoteIP());
-    // Make a HTTP request:
-    client.println("GET /search?q=arduino HTTP/1.1");
-    client.println("Host: www.google.com");
-    client.println("Connection: close");
-    client.println();
-  } else {
-    // if you didn't get a connection to the server:
-    Serial.println("connection failed");
-  }
-  beginMicros = micros();
+    beginMicros = micros();
 }
 
-void loop() {
-  // if there are incoming bytes available
-  // from the server, read them and print them:
-  int len = client.available();
-  if (len > 0) {
-    byte buffer[80];
-    if (len > 80) len = 80;
-    client.read(buffer, len);
-    if (printWebData) {
-      Serial.write(buffer, len); // show in the serial monitor (slows some boards)
+void loop()
+{
+    // if there are incoming bytes available
+    // from the server, read them and print them:
+    int len = client.available();
+    if (len > 0) {
+        byte buffer[80];
+        if (len > 80)
+            len = 80;
+        client.read(buffer, len);
+        if (printWebData) {
+            Serial.write(buffer, len); // show in the serial monitor (slows some boards)
+        }
+        byteCount = byteCount + len;
     }
-    byteCount = byteCount + len;
-  }
-
-  // if the server's disconnected, stop the client:
-  if (!client.connected()) {
-    endMicros = micros();
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-    Serial.print("Received ");
-    Serial.print(byteCount);
-    Serial.print(" bytes in ");
-    float seconds = (float)(endMicros - beginMicros) / 1000000.0;
-    Serial.print(seconds, 4);
-    float rate = (float)byteCount / seconds / 1000.0;
-    Serial.print(", rate = ");
-    Serial.print(rate);
-    Serial.print(" kbytes/second");
-    Serial.println();
-
-    // do nothing forevermore:
-    while (true) {
-      delay(1);
+
+    // if the server's disconnected, stop the client:
+    if (!client.connected()) {
+        endMicros = micros();
+        Serial.println();
+        Serial.println("disconnecting.");
+        client.stop();
+        Serial.print("Received ");
+        Serial.print(byteCount);
+        Serial.print(" bytes in ");
+        float seconds = (float)(endMicros - beginMicros) / 1000000.0;
+        Serial.print(seconds, 4);
+        float rate = (float)byteCount / seconds / 1000.0;
+        Serial.print(", rate = ");
+        Serial.print(rate);
+        Serial.print(" kbytes/second");
+        Serial.println();
+
+        // do nothing forevermore:
+        while (true) {
+            delay(1);
+        }
     }
-  }
 }
-