Skip to content

Conversation

@bradleytechman
Copy link
Contributor

@bradleytechman bradleytechman commented Nov 12, 2025

This PR adds:

Feel free to change anything.

Copy link
Contributor Author

@bradleytechman bradleytechman left a comment

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

All fixed and ready to be merged

@bradleytechman
Copy link
Contributor Author

Also, someone has to update the guides in the getting started page, because I couldn't figure that out.

@TheMasterOfMike
Copy link
Collaborator

TheMasterOfMike commented Dec 2, 2025

Also, someone has to update the guides in the getting started page, because I couldn't figure that out.

The guides that are listed when you go to get started and the device selection and stuff are handled through AppleDB.

I'll review this shortly by the way.

@bradleytechman
Copy link
Contributor Author

Sounds good

Copy link
Collaborator

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

To avoid restating this numerous times - imo it would probably be better to align closer to https://ios.cfw.guide/installing-checkra1n-tv/ (or alternatively align the checkra1n/odysseyn1x guides to align with this one, but I'm disinclined on this due to how palera1n is).

This may warrant further discussion/context in the replies to this comment or in the r/jailbreak Discord.

Copy link
Contributor Author

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

I think it's fine like this, especially because there are two different tvOS versions that need guides made for them. If I were to make it look like the checkra1n guide, then that creates more guides. I will update them to not say the name of the devices but rather the model number though to align it a bit more.

Copy link
Collaborator

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

I think it's fine like this, especially because there are two different tvOS versions that need guides made for them. If I were to make it look like the checkra1n guide, then that creates more guides. I will update them to not say the name of the devices but rather the model number though to align it a bit more.

I'm more referring to the titles/file names/urls and such.

I guess what I'm envisioning is "Installing palera1n (Apple TV) (tvOS 15.0-18.1)" or something like that

Copy link
Contributor Author

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Maybe i'm just being stupid, but that's what it is right now

It's currently split up into two guides for the tvos versions
Screenshot 2025-12-04 at 5 25 09 PM


::: tip

A9(X) and earlier devices have an issue where they will get stuck midway through this process in pongoOS. To work around this, you'll need to do the following:
Copy link
Collaborator

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Does this apply to Apple TV's? If it does, the start of this sentence should be changed to "The Apple TV HD has an issue".

Copy link
Collaborator

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Everything said on the previous file also applies here (I won't re-include/highlight everything for brevity since it would be another 9+ comments of mostly the same thing).

(From the previous file): To avoid restating this numerous times - imo it would probably be better to align closer to https://ios.cfw.guide/installing-checkra1n-tv/ (or alternatively align the checkra1n/odysseyn1x guides to align with this one, but I'm disinclined on this due to how palera1n is).

This may warrant further discussion/context in the replies to this comment or in the r/jailbreak Discord.

Copy link
Collaborator

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

(From a previous file): To avoid restating this numerous times - imo it would probably be better to align closer to https://ios.cfw.guide/installing-checkra1n-tv/ (or alternatively align the checkra1n/odysseyn1x guides to align with this one, but I'm disinclined on this due to how palera1n is).

This may warrant further discussion/context in the replies to this comment or in the r/jailbreak Discord.

Copy link
Collaborator

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Everything said on the prior files also applies here (I won't re-include/highlight everything for brevity since it would be another 9+ comments of mostly the same thing).

(From the prior files): To avoid restating this numerous times - imo it would probably be better to align closer to https://ios.cfw.guide/installing-checkra1n-tv/ (or alternatively align the checkra1n/odysseyn1x guides to align with this one, but I'm disinclined on this due to how palera1n is).

This may warrant further discussion/context in the replies to this comment or in the r/jailbreak Discord.

Copilot AI review requested due to automatic review settings December 4, 2025 21:37
@bradleytechman
Copy link
Contributor Author

why did copilot review this lol... i never requested it

Copy link

Copilot AI left a comment

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Pull request overview

This PR adds comprehensive palera1n tvOS jailbreak guides, introduces a purePKG package manager guide, and includes minor corrections to existing documentation. The main addition is support for jailbreaking Apple TV devices (HD and 4K) using palera1n across different tvOS versions.

Key changes:

  • New tvOS jailbreak guides for palera1n covering installation, removal, and different tvOS version ranges
  • New purePKG package manager guide for tvOS users
  • CSS support for detail blocks in documentation
  • Minor text corrections in existing guides (typo fixes, clarity improvements)

Reviewed changes

Copilot reviewed 11 out of 11 changed files in this pull request and generated 14 comments.

Show a summary per file
File Description
emiyl-theme/styles/custom-container.scss Adds CSS styling for detail blocks to improve documentation presentation
docs/en_US/misc/site-navigation.md Adds navigation link to the new palera1n tvOS installation guide
docs/en_US/jailbreak/using-palen1x.md Minor text correction replacing "CD or DVD" with "SD card or DVD"
docs/en_US/jailbreak/installing-palera1n.md Adds warning directing tvOS users to the tvOS-specific guide
docs/en_US/jailbreak/removing-palera1n-tvos.md New guide for uninstalling palera1n from Apple TV devices
docs/en_US/jailbreak/installing-palera1n-tvos.md New routing guide directing users to appropriate version-specific instructions
docs/en_US/jailbreak/installing-palera1n-tvos-18.2.md New comprehensive guide for jailbreaking tvOS 18.2+ devices with palera1n
docs/en_US/jailbreak/installing-palera1n-tvos-15.0.md New comprehensive guide for jailbreaking tvOS 15.0-18.1 devices with palera1n
docs/en_US/include/using-sileo.md Fixes wording: "reboot" → "respring" and "install" → "uninstall" for accuracy
docs/en_US/include/using-purePKG.md New complete guide for using the purePKG package manager on tvOS
docs/en_US/guides/trollstore/index.md Updates TrollStore compatibility version from 15.8.4 to 15.8.5

💡 Add Copilot custom instructions for smarter, more guided reviews. Learn how to get started.

- <router-link to="/using-checkm8-a5">Using checkm8-a5</router-link>
- <router-link to="/installing-patchstick">Installing Patchstick</router-link>

- <router-link to="/installing-palera1n-tvos">Installing palera1n(tvOS)</router-link>
Copy link

Copilot AI Dec 4, 2025

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Missing space in the title. The link text should have a space between "palera1n" and "(tvOS)" for better readability.

Suggested change
- <router-link to="/installing-palera1n-tvos">Installing palera1n(tvOS)</router-link>
- <router-link to="/installing-palera1n-tvos">Installing palera1n (tvOS)</router-link>

Copilot uses AI. Check for mistakes.

::: details Apple TV 4K instructions
1. Plug your GoldenEye/Foxlink cable into the Ethernet port on your Apple TV.
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside down-the side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.
Copy link

Copilot AI Dec 4, 2025

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Missing space after the hyphen. The text reads "upside down-the" but should be "upside down—the" (with an em dash) or "upside down - the" (with spaces around the hyphen).

Suggested change
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside down-the side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside downthe side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.

Copilot uses AI. Check for mistakes.
::: details Apple TV 4K instructions
1. Once you have loaded palen1x, select `Shell`.
1. Plug your GoldenEye/Foxlink cable into the Ethernet port on your Apple TV.
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside down-the side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.
Copy link

Copilot AI Dec 4, 2025

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Missing space after the hyphen. The text reads "upside down-the" but should be "upside down—the" (with an em dash) or "upside down - the" (with spaces around the hyphen).

Suggested change
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside down-the side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside downthe side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.

Copilot uses AI. Check for mistakes.
::: details Apple TV 4K instructions
1. Once you have loaded palen1x, select `Shell`.
1. Plug your GoldenEye/Foxlink cable into the Ethernet port on your Apple TV.
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside down-the side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.
Copy link

Copilot AI Dec 4, 2025

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Missing space after the hyphen. The text reads "upside down-the" but should be "upside down—the" (with an em dash) or "upside down - the" (with spaces around the hyphen).

Suggested change
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside down-the side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside downthe side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.

Copilot uses AI. Check for mistakes.

::: details Apple TV 4K instructions
1. Plug your GoldenEye/Foxlink cable into the Ethernet port on your Apple TV.
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside down-the side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.
Copy link

Copilot AI Dec 4, 2025

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Missing space after the hyphen. The text reads "upside down-the" but should be "upside down—the" (with an em dash) or "upside down - the" (with spaces around the hyphen).

Suggested change
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside down-the side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside downthe side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.

Copilot uses AI. Check for mistakes.

::: tip

If you are running tvOS 15.0 - 18.1, continue to <router-link to="/installing-palera1n-tvos-18.1">Installing palera1n (tvOS, 15.0 - 18.1)</router-link>
Copy link

Copilot AI Dec 4, 2025

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

The router link points to /installing-palera1n-tvos-18.1 but the actual permalink in that file is /installing-palera1n-tvos-15.0. This will result in a broken link. The link should be updated to match the actual permalink.

Suggested change
If you are running tvOS 15.0 - 18.1, continue to <router-link to="/installing-palera1n-tvos-18.1">Installing palera1n (tvOS, 15.0 - 18.1)</router-link>
If you are running tvOS 15.0 - 18.1, continue to <router-link to="/installing-palera1n-tvos-15.0">Installing palera1n (tvOS, 15.0 - 18.1)</router-link>

Copilot uses AI. Check for mistakes.
## Installing Tweaks

1. Open the purePKG application
1. Navigate to "Installed" on the bar at the top
Copy link

Copilot AI Dec 4, 2025

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Typo in step 51. The text says to navigate to "Installed" when installing tweaks, but it should likely be "Browse" or "Search" since you're looking for new tweaks to install. The "Installed" tab would be for tweaks already installed on the device.

Suggested change
1. Navigate to "Installed" on the bar at the top
1. Navigate to "Browse" on the bar at the top

Copilot uses AI. Check for mistakes.

::: details Apple TV 4K instructions
1. Plug your GoldenEye/Foxlink cable into the Ethernet port on your Apple TV.
1. Plug your DCSD cable into the Lightning connector on the GoldenEye/Foxlink cable upside down—the side labeled "this side up" or similar should face down; otherwise, it might not enter <router-link to="/faq/#what-is-dfu-mode">DFU mode</router-link>.
Copy link

Copilot AI Dec 4, 2025

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Missing space after the hyphen. The text reads "upside down-the" but should be "upside down—the" (with an em dash) or "upside down - the" (with spaces around the hyphen).

Copilot uses AI. Check for mistakes.
1. Restart your Apple TV with both cables plugged in to put it into DFU mode.
1. Once in DFU mode, unplug your DCSD cable (**not** your GoldenEye/Foxlink cable, keep that plugged in) and plug in your Lightning cable, with the other end connected to your computer.
1. Run `palera1n -cf`.
1. After you have created the fakeFS by running the command above, redo steps 2-5 to go back into DFU mode, then come back to the next step.
Copy link

Copilot AI Dec 4, 2025

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Inconsistent step reference. The instruction says to "redo steps 1-5" but in the palen1x tab, step 1 is "Once you have loaded palen1x, select Shell" which shouldn't be redone. It should say "redo steps 2-6" to correctly reference only the cable connection and DFU mode steps.

Suggested change
1. After you have created the fakeFS by running the command above, redo steps 2-5 to go back into DFU mode, then come back to the next step.
1. After you have created the fakeFS by running the command above, redo steps 2-6 to go back into DFU mode, then come back to the next step.

Copilot uses AI. Check for mistakes.
@bradleytechman
Copy link
Contributor Author

I guess that was a bit helpful because it caught some mistakes, but, I never even requested it 😭

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

2 participants