dotnet · brettfo · Feb 19, 2019 · Feb 5, 2019 · Feb 6, 2019 · Feb 6, 2019
diff --git a/src/fsharp/fsi/xlf/FSIstrings.txt.ru.xlf b/src/fsharp/fsi/xlf/FSIstrings.txt.ru.xlf
@@ -189,7 +189,7 @@
       </trans-unit>
       <trans-unit id="fsiInterrupt">
         <source>\n- Interrupt\n</source>
-        <target state="translated">\n- Interrupt\n</target>
+        <target state="translated">\n- Прерывать\n</target>
         <note />
       </trans-unit>
       <trans-unit id="fsiExit">

diff --git a/src/fsharp/xlf/FSComp.txt.fr.xlf b/src/fsharp/xlf/FSComp.txt.fr.xlf
@@ -5914,17 +5914,17 @@
       </trans-unit>
       <trans-unit id="customOperationTextLikeJoin">
         <source>{0} var in collection {1} (outerKey = innerKey). Note that parentheses are required after '{2}'</source>
-        <target state="translated">{0} var in collection {1} (outerKey = innerKey). Notez que les parenthèses sont obligatoires après '{2}'</target>
+        <target state="translated">var {0} dans la collection {1} (outerKey = innerKey). Notez que les parenthèses sont obligatoires après '{2}'</target>
         <note />
       </trans-unit>
       <trans-unit id="customOperationTextLikeGroupJoin">
         <source>{0} var in collection {1} (outerKey = innerKey) into group. Note that parentheses are required after '{2}'</source>
-        <target state="translated">{0} var in collection {1} (outerKey = innerKey) dans le groupe. Notez que les parenthèses sont obligatoires après '{2}'</target>
+        <target state="translated">var {0} dans la collection {1} (outerKey = innerKey) au sein du groupe. Notez que les parenthèses sont obligatoires après '{2}'</target>
         <note />
       </trans-unit>
       <trans-unit id="customOperationTextLikeZip">
         <source>{0} var in collection</source>
-        <target state="translated">{0} var in collection</target>
+        <target state="translated">var {0} dans la collection</target>
         <note />
       </trans-unit>
       <trans-unit id="tcBinaryOperatorRequiresVariable">

diff --git a/src/fsharp/xlf/FSComp.txt.ja.xlf b/src/fsharp/xlf/FSComp.txt.ja.xlf
@@ -5916,12 +5916,12 @@
       </trans-unit>
       <trans-unit id="customOperationTextLikeJoin">
         <source>{0} var in collection {1} (outerKey = innerKey). Note that parentheses are required after '{2}'</source>
-        <target state="translated">{0} var in collection {1} (outerKey = innerKey)。'{2}' の後ろにはかっこが必要です。</target>
+        <target state="translated">{0} var in collection {1} (outerKey = innerKey)。'{2}' の後にかっこが必要であることに注意してください</target>
         <note />
       </trans-unit>
       <trans-unit id="customOperationTextLikeGroupJoin">
         <source>{0} var in collection {1} (outerKey = innerKey) into group. Note that parentheses are required after '{2}'</source>
-        <target state="translated">{0} var in collection {1} (outerKey = innerKey) into group。'{2}' の後ろにかっこが必要です</target>
+        <target state="translated">コレクション {1} (outerKey = innerKey) の {0} をグループに var 宣言します。'{2}' の後にかっこが必要であることに注意してください</target>
         <note />
       </trans-unit>
       <trans-unit id="customOperationTextLikeZip">

diff --git a/src/fsharp/xlf/FSComp.txt.ko.xlf b/src/fsharp/xlf/FSComp.txt.ko.xlf
@@ -5914,7 +5914,7 @@
       </trans-unit>
       <trans-unit id="customOperationTextLikeJoin">
         <source>{0} var in collection {1} (outerKey = innerKey). Note that parentheses are required after '{2}'</source>
-        <target state="translated">{0} var in collection {1} (outerKey = innerKey). '{2}' 다음에 괄호가 필요합니다.</target>
+        <target state="translated">{0} var in collection {1} (outerKey = innerKey). '{2}' 뒤에 괄호가 필요합니다.</target>
         <note />
       </trans-unit>
       <trans-unit id="customOperationTextLikeGroupJoin">

diff --git a/src/fsharp/xlf/FSComp.txt.zh-Hans.xlf b/src/fsharp/xlf/FSComp.txt.zh-Hans.xlf
@@ -5914,17 +5914,17 @@
       </trans-unit>
       <trans-unit id="customOperationTextLikeJoin">
         <source>{0} var in collection {1} (outerKey = innerKey). Note that parentheses are required after '{2}'</source>
-        <target state="translated">{0} var in collection {1} (outerKey = innerKey)。请注意，“{2}”后需使用括号</target>
+        <target state="translated">集合 {1} (outerKey = innerKey)中的 {0} var。请注意，“{2}”后面要使用圆括号</target>
         <note />
       </trans-unit>
       <trans-unit id="customOperationTextLikeGroupJoin">
         <source>{0} var in collection {1} (outerKey = innerKey) into group. Note that parentheses are required after '{2}'</source>
-        <target state="translated">{0} var in collection {1} (outerKey = innerKey) into group。请注意，“{2}”后需使用括号。</target>
+        <target state="translated">集合 {1} (outerKey = innerKey) 中的 {0} var 到组中。请注意, 在 "{2}" 之后需要圆括号</target>
         <note />
       </trans-unit>
       <trans-unit id="customOperationTextLikeZip">
         <source>{0} var in collection</source>
-        <target state="translated">{0} var in collection</target>
+        <target state="translated">集合中的 {0} var</target>
         <note />
       </trans-unit>
       <trans-unit id="tcBinaryOperatorRequiresVariable">

diff --git a/src/fsharp/xlf/FSComp.txt.zh-Hant.xlf b/src/fsharp/xlf/FSComp.txt.zh-Hant.xlf
@@ -5914,17 +5914,17 @@
       </trans-unit>
       <trans-unit id="customOperationTextLikeJoin">
         <source>{0} var in collection {1} (outerKey = innerKey). Note that parentheses are required after '{2}'</source>
-        <target state="translated">{0} var in collection {1} (outerKey = innerKey)。注意: '{2}' 之後須有括號</target>
+        <target state="translated">集合 {1} 中的 {0} var (outerKey = innerKey)。請注意，'{2}' 後需要括弧</target>
         <note />
       </trans-unit>
       <trans-unit id="customOperationTextLikeGroupJoin">
         <source>{0} var in collection {1} (outerKey = innerKey) into group. Note that parentheses are required after '{2}'</source>
-        <target state="translated">{0} var in collection {1} (outerKey = innerKey) into group。注意: '{2}' 之後須有括號</target>
+        <target state="translated">集合 {1} 中的 {0} var (outerKey = innerKey) 進入群組。請注意，'{2}' 後需要括弧。</target>
         <note />
       </trans-unit>
       <trans-unit id="customOperationTextLikeZip">
         <source>{0} var in collection</source>
-        <target state="translated">{0} var in collection</target>
+        <target state="translated">集合中的 {0} var</target>
         <note />
       </trans-unit>
       <trans-unit id="tcBinaryOperatorRequiresVariable">

diff --git a/src/fsharp/xlf/FSStrings.ja.xlf b/src/fsharp/xlf/FSStrings.ja.xlf
@@ -1609,7 +1609,7 @@
       </trans-unit>
       <trans-unit id="MSBuildReferenceResolutionError">
         <source>{0} (Code={1})</source>
-        <target state="translated">{0} (Code={1})</target>
+        <target state="translated">{0} (コード={1})</target>
         <note />
       </trans-unit>
       <trans-unit id="TargetInvocationExceptionWrapper">

diff --git a/src/fsharp/xlf/FSStrings.pt-BR.xlf b/src/fsharp/xlf/FSStrings.pt-BR.xlf
@@ -1609,7 +1609,7 @@
       </trans-unit>
       <trans-unit id="MSBuildReferenceResolutionError">
         <source>{0} (Code={1})</source>
-        <target state="translated">{0} (Code={1})</target>
+        <target state="translated">{0} (código = {1})</target>
         <note />
       </trans-unit>
       <trans-unit id="TargetInvocationExceptionWrapper">

diff --git a/src/fsharp/xlf/FSStrings.tr.xlf b/src/fsharp/xlf/FSStrings.tr.xlf
@@ -954,7 +954,7 @@
       </trans-unit>
       <trans-unit id="Parser.TOKEN.WHITESPACE">
         <source>whitespace</source>
-        <target state="translated">whitespace</target>
+        <target state="translated">boşluk</target>
         <note />
       </trans-unit>
       <trans-unit id="Parser.TOKEN.COMMENT">

diff --git a/vsintegration/ProjectTemplates/TutorialProject/Template/xlf/Tutorial.fsx.ja.xlf b/vsintegration/ProjectTemplates/TutorialProject/Template/xlf/Tutorial.fsx.ja.xlf
@@ -899,7 +899,7 @@
       </trans-unit>
       <trans-unit id="Records-Line1">
         <source>Records are an aggregate of named values, with optional members (such as methods).</source>
-        <target state="translated">レコードは、オプションのメンバー (メソッドなど) を含む名前付きの値の集合です。</target>
+        <target state="translated">レコードは、オプションのメンバー (メソッドなど) を含む名前付きの値の集約です。</target>
         <note />
       </trans-unit>
       <trans-unit id="Records-Line2">
@@ -1294,7 +1294,7 @@
       </trans-unit>
       <trans-unit id="Option-Line1">
         <source>Option values are any kind of value tagged with either 'Some' or 'None'.</source>
-        <target state="translated">オプション値とは、'Some' または 'None' が指定されたあらゆる種類の値です。</target>
+        <target state="translated">オプション値とは、'Some' または 'None' がタグされたあらゆる種類の値です。</target>
         <note />
       </trans-unit>
       <trans-unit id="Option-Line2">

diff --git a/vsintegration/ProjectTemplates/TutorialProject/Template/xlf/Tutorial.fsx.pl.xlf b/vsintegration/ProjectTemplates/TutorialProject/Template/xlf/Tutorial.fsx.pl.xlf
@@ -1294,7 +1294,7 @@
       </trans-unit>
       <trans-unit id="Option-Line1">
         <source>Option values are any kind of value tagged with either 'Some' or 'None'.</source>
-        <target state="translated">Wartości opcji to dowolne wartości oznaczone jako „Some” lub „None”.</target>
+        <target state="translated">Wartości opcji to dowolne wartości otagowane jako „Some” lub „None”.</target>
         <note />
       </trans-unit>
       <trans-unit id="Option-Line2">

diff --git a/vsintegration/ProjectTemplates/TutorialProject/Template/xlf/Tutorial.fsx.tr.xlf b/vsintegration/ProjectTemplates/TutorialProject/Template/xlf/Tutorial.fsx.tr.xlf
@@ -899,7 +899,7 @@
       </trans-unit>
       <trans-unit id="Records-Line1">
         <source>Records are an aggregate of named values, with optional members (such as methods).</source>
-        <target state="translated">Kayıtlar, isteğe bağlı üyeleri (örneğin, metotlar) içeren adlandırılmış değerlerin toplamıdır.</target>
+        <target state="translated">Kayıtlar, isteğe bağlı üyeleri (örneğin, metotlar) içeren adlandırılmış değerlerin kümesidir.</target>
         <note />
       </trans-unit>
       <trans-unit id="Records-Line2">

diff --git a/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.cs.xlf b/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.cs.xlf
@@ -792,7 +792,7 @@
       </trans-unit>
       <trans-unit id="Path">
         <source>Path</source>
-        <target state="translated">PATH</target>
+        <target state="translated">Cesta</target>
         <note />
       </trans-unit>
       <trans-unit id="PathDescription">

diff --git a/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.es.xlf b/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.es.xlf
@@ -792,7 +792,7 @@
       </trans-unit>
       <trans-unit id="Path">
         <source>Path</source>
-        <target state="translated">PATH</target>
+        <target state="translated">Ruta de acceso</target>
         <note />
       </trans-unit>
       <trans-unit id="PathDescription">

diff --git a/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.fr.xlf b/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.fr.xlf
@@ -792,7 +792,7 @@
       </trans-unit>
       <trans-unit id="Path">
         <source>Path</source>
-        <target state="translated">PATH</target>
+        <target state="translated">Chemin</target>
         <note />
       </trans-unit>
       <trans-unit id="PathDescription">

diff --git a/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.ja.xlf b/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.ja.xlf
@@ -792,7 +792,7 @@
       </trans-unit>
       <trans-unit id="Path">
         <source>Path</source>
-        <target state="translated">PATH</target>
+        <target state="translated">パス</target>
         <note />
       </trans-unit>
       <trans-unit id="PathDescription">

diff --git a/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.ko.xlf b/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.ko.xlf
@@ -257,7 +257,7 @@
       </trans-unit>
       <trans-unit id="Misc">
         <source>Misc</source>
-        <target state="translated">Misc</target>
+        <target state="translated">기타</target>
         <note />
       </trans-unit>
       <trans-unit id="None">
@@ -792,7 +792,7 @@
       </trans-unit>
       <trans-unit id="Path">
         <source>Path</source>
-        <target state="translated">PATH</target>
+        <target state="translated">경로</target>
         <note />
       </trans-unit>
       <trans-unit id="PathDescription">

diff --git a/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.pl.xlf b/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.pl.xlf
@@ -257,7 +257,7 @@
       </trans-unit>
       <trans-unit id="Misc">
         <source>Misc</source>
-        <target state="translated">Misc</target>
+        <target state="translated">Różne</target>
         <note />
       </trans-unit>
       <trans-unit id="None">

diff --git a/...rc/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.pt-BR.xlf b/...rc/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.pt-BR.xlf
@@ -792,7 +792,7 @@
       </trans-unit>
       <trans-unit id="Path">
         <source>Path</source>
-        <target state="translated">PATH</target>
+        <target state="translated">Caminho</target>
         <note />
       </trans-unit>
       <trans-unit id="PathDescription">

diff --git a/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.ru.xlf b/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.ru.xlf
@@ -612,7 +612,7 @@
       </trans-unit>
       <trans-unit id="DetailsUsingTask">
         <source>A 'UsingTask' tag which registers the '{1}' task was found in the project file '{0}'.  'UsingTask' tags in the project file take precedence over those in the imported .TARGETS files, and therefore could be used to execute arbitrary code during an otherwise unmodified build process.</source>
-        <target state="translated">В файле проекта "{0}" обнаружен тег "UsingTask", регистрирующий задачу "{1}".  Метки &lt;UsingTask&gt; в файле проекта имеют превосходство перед импортированными .TARGETS-файлами, и поэтому могут быть использованы для выполнения произвольного кода во время не изменяемого другими средствами процесса сборки.</target>
+        <target state="translated">В файле проекта "{0}" обнаружен тег "UsingTask", регистрирующий задачу "{1}".  Теги "UsingTask" в файле проекта имеют превосходство перед импортированными .TARGETS-файлами, и поэтому могут быть использованы для выполнения произвольного кода во время не изменяемого другими средствами процесса сборки.</target>
         <note />
       </trans-unit>
       <trans-unit id="DetailsTarget">

diff --git a/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.tr.xlf b/...n/src/FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.tr.xlf
@@ -257,7 +257,7 @@
       </trans-unit>
       <trans-unit id="Misc">
         <source>Misc</source>
-        <target state="translated">Misc</target>
+        <target state="translated">Çeşitli</target>
         <note />
       </trans-unit>
       <trans-unit id="None">
@@ -792,7 +792,7 @@
       </trans-unit>
       <trans-unit id="Path">
         <source>Path</source>
-        <target state="translated">PATH</target>
+        <target state="translated">Yol</target>
         <note />
       </trans-unit>
       <trans-unit id="PathDescription">

diff --git a/.../FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.zh-Hans.xlf b/.../FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.zh-Hans.xlf
@@ -792,7 +792,7 @@
       </trans-unit>
       <trans-unit id="Path">
         <source>Path</source>
-        <target state="translated">PATH</target>
+        <target state="translated">路径</target>
         <note />
       </trans-unit>
       <trans-unit id="PathDescription">

diff --git a/.../FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.zh-Hant.xlf b/.../FSharp.ProjectSystem.Base/Project/xlf/Microsoft.VisualStudio.Package.Project.zh-Hant.xlf
@@ -792,7 +792,7 @@
       </trans-unit>
       <trans-unit id="Path">
         <source>Path</source>
-        <target state="translated">PATH</target>
+        <target state="translated">路徑</target>
         <note />
       </trans-unit>
       <trans-unit id="PathDescription">

diff --git a/...on/src/FSharp.ProjectSystem.PropertyPages/PropertyPages/xlf/ReferencePathsPropPage.de.xlf b/...on/src/FSharp.ProjectSystem.PropertyPages/PropertyPages/xlf/ReferencePathsPropPage.de.xlf
@@ -39,7 +39,7 @@
       </trans-unit>
       <trans-unit id="RemoveFolder.AccessibleName">
         <source>Delete</source>
-        <target state="translated">löschen</target>
+        <target state="translated">Löschen</target>
         <note />
       </trans-unit>
       <trans-unit id="FolderLabel.Text">

diff --git a/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.cs.xlf b/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.cs.xlf
@@ -1830,7 +1830,6 @@ CONSIDER: get this from CodeDom</note>
         <source>{0} x {1}</source>
         <target state="translated">{0} x {1}</target>
         <note>Format string for showing a graphic's size
-
 #  {0} = width (as an integer)
 #  {1} = height (as an integer)
 #Example, for a bitmap of width=123, height = 456, the English version of this string would be "123x456"</note>

diff --git a/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.de.xlf b/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.de.xlf
@@ -875,7 +875,7 @@ Fehler:</target>
       </trans-unit>
       <trans-unit id="PPG_UrlBehavior_Static">
         <source>Static</source>
-        <target state="translated">Static</target>
+        <target state="translated">Statisch</target>
         <note />
       </trans-unit>
       <trans-unit id="PPG_UrlBehavior_Dynamic">
@@ -1830,7 +1830,6 @@ CONSIDER: get this from CodeDom</note>
         <source>{0} x {1}</source>
         <target state="translated">{0} x {1}</target>
         <note>Format string for showing a graphic's size
-
 #  {0} = width (as an integer)
 #  {1} = height (as an integer)
 #Example, for a bitmap of width=123, height = 456, the English version of this string would be "123x456"</note>

diff --git a/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.es.xlf b/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.es.xlf
@@ -1830,7 +1830,6 @@ CONSIDER: get this from CodeDom</note>
         <source>{0} x {1}</source>
         <target state="translated">{0} x {1}</target>
         <note>Format string for showing a graphic's size
-
 #  {0} = width (as an integer)
 #  {1} = height (as an integer)
 #Example, for a bitmap of width=123, height = 456, the English version of this string would be "123x456"</note>

diff --git a/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.fr.xlf b/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.fr.xlf
@@ -1830,7 +1830,6 @@ CONSIDER: get this from CodeDom</note>
         <source>{0} x {1}</source>
         <target state="translated">{0} x {1}</target>
         <note>Format string for showing a graphic's size
-
 #  {0} = width (as an integer)
 #  {1} = height (as an integer)
 #Example, for a bitmap of width=123, height = 456, the English version of this string would be "123x456"</note>
@@ -1969,12 +1968,12 @@ CONSIDER: get this from CodeDom</note>
       </trans-unit>
       <trans-unit id="RSE_Type_PNG">
         <source>Portable Network Graphics</source>
-        <target state="translated">Portable Network Graphics</target>
+        <target state="translated">Format PNG</target>
         <note>Friendly Image types</note>
       </trans-unit>
       <trans-unit id="RSE_Type_TIFF">
         <source>Tag Image File Format</source>
-        <target state="translated">Tag Image File Format</target>
+        <target state="translated">Format TIF</target>
         <note>Friendly Image types</note>
       </trans-unit>
       <trans-unit id="RSE_Type_Icon">
@@ -2063,7 +2062,7 @@ CONSIDER: get this from CodeDom</note>
       </trans-unit>
       <trans-unit id="RSE_FilterSave_PNG">
         <source>Portable Network Graphics</source>
-        <target state="translated">Portable Network Graphics</target>
+        <target state="translated">Format PNG</target>
         <note># File dialog filters
 #
 # E.g., for icons, the actual filter created would look like "Icons (*.ico)".  These resources
@@ -2090,7 +2089,7 @@ CONSIDER: get this from CodeDom</note>
       </trans-unit>
       <trans-unit id="RSE_FilterSave_TIFF">
         <source>Tag Image File Format</source>
-        <target state="translated">Tag Image File Format</target>
+        <target state="translated">Format TIF</target>
         <note># File dialog filters
 #
 # E.g., for icons, the actual filter created would look like "Icons (*.ico)".  These resources

diff --git a/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.it.xlf b/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.it.xlf
@@ -1830,7 +1830,6 @@ CONSIDER: get this from CodeDom</note>
         <source>{0} x {1}</source>
         <target state="translated">{0} x {1}</target>
         <note>Format string for showing a graphic's size
-
 #  {0} = width (as an integer)
 #  {1} = height (as an integer)
 #Example, for a bitmap of width=123, height = 456, the English version of this string would be "123x456"</note>

diff --git a/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.ja.xlf b/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.ja.xlf
@@ -1830,7 +1830,6 @@ CONSIDER: get this from CodeDom</note>
         <source>{0} x {1}</source>
         <target state="translated">{0} x {1}</target>
         <note>Format string for showing a graphic's size
-
 #  {0} = width (as an integer)
 #  {1} = height (as an integer)
 #Example, for a bitmap of width=123, height = 456, the English version of this string would be "123x456"</note>

diff --git a/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.ko.xlf b/....ProjectSystem.PropertyPages/Resources/xlf/Microsoft.VisualStudio.Editors.Designer.ko.xlf
@@ -1830,7 +1830,6 @@ CONSIDER: get this from CodeDom</note>
         <source>{0} x {1}</source>
         <target state="translated">{0} x {1}</target>
         <note>Format string for showing a graphic's size
-
 #  {0} = width (as an integer)
 #  {1} = height (as an integer)
 #Example, for a bitmap of width=123, height = 456, the English version of this string would be "123x456"</note>