Add blinky_erased_pins example for ESP32-H2

CHANGELOG.md

@@ -17,6 +17,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - Add async support to the I2C driver (#519)
 - Add initial support for SHA in ESP32-H2 (#527)
 - Add initial support for AES in ESP32-H2 (#528)
+- Add blinky_erased_pins example for ESP32-H2 (#530)
 
 ### Fixed
 

esp32-hal/examples/blinky_erased_pins.rs

@@ -34,14 +34,16 @@ fn main() -> ! {
     wdt.disable();
     rtc.rwdt.disable();
 
+    // Set LED GPIOs as an output.
     let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
     let led1 = io.pins.gpio25.into_push_pull_output();
     let led2 = io.pins.gpio26.into_push_pull_output();
     let led3 = io.pins.gpio27.into_push_pull_output();
 
+    // Set GPIO9 as an input.
     let button = io.pins.gpio0.into_pull_down_input().degrade();
 
-    // you can use `into` or `degrade`
+    // You can use `into` or `degrade`
     let mut pins = [led1.into(), led2.into(), led3.degrade()];
 
     // Initialize the Delay peripheral, and use it to toggle the LED state in a

esp32c2-hal/examples/blinky_erased_pins.rs

@@ -36,14 +36,16 @@ fn main() -> ! {
     rtc.rwdt.disable();
     wdt0.disable();
 
+    // Set LED GPIOs as an output.
     let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
     let led1 = io.pins.gpio3.into_push_pull_output();
     let led2 = io.pins.gpio4.into_push_pull_output();
     let led3 = io.pins.gpio5.into_push_pull_output();
 
+    // Set GPIO9 as an input.
     let button = io.pins.gpio9.into_pull_down_input().degrade();
 
-    // you can use `into` or `degrade`
+    // You can use `into` or `degrade`
     let mut pins = [led1.into(), led2.into(), led3.degrade()];
 
     // Initialize the Delay peripheral, and use it to toggle the LED state in a

esp32c3-hal/examples/blinky_erased_pins.rs

@@ -43,14 +43,16 @@ fn main() -> ! {
     wdt0.disable();
     wdt1.disable();
 
+    // Set LED GPIOs as an output.
     let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
     let led1 = io.pins.gpio3.into_push_pull_output();
     let led2 = io.pins.gpio4.into_push_pull_output();
     let led3 = io.pins.gpio5.into_push_pull_output();
 
+    // Set GPIO9 as an input.
     let button = io.pins.gpio9.into_pull_down_input().degrade();
 
-    // you can use `into` or `degrade`
+    // You can use `into` or `degrade`
     let mut pins = [led1.into(), led2.into(), led3.degrade()];
 
     // Initialize the Delay peripheral, and use it to toggle the LED state in a

esp32c6-hal/examples/blinky_erased_pins.rs

@@ -43,15 +43,16 @@ fn main() -> ! {
     wdt0.disable();
     wdt1.disable();
 
-    // Set GPIO4 as an output, and set its state high initially.
+    // Set LED GPIOs as an output.
     let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
     let led1 = io.pins.gpio3.into_push_pull_output();
     let led2 = io.pins.gpio4.into_push_pull_output();
     let led3 = io.pins.gpio5.into_push_pull_output();
 
+    // Set GPIO9 as an input.
     let button = io.pins.gpio9.into_pull_down_input().degrade();
 
-    // you can use `into` or `degrade`
+    // You can use `into` or `degrade`
     let mut pins = [led1.into(), led2.into(), led3.degrade()];
 
     // Initialize the Delay peripheral, and use it to toggle the LED state in a

esp32h2-hal/examples/blinky_erased_pins.rs

@@ -0,0 +1,76 @@
+//! Blinks an LED
+//!
+//! This assumes that LEDs are connected to GPIO3, 4 and 5.
+
+#![no_std]
+#![no_main]
+
+use esp32h2_hal::{
+    clock::ClockControl,
+    gpio::{AnyPin, Input, Output, PullDown, PushPull, IO},
+    peripherals::Peripherals,
+    prelude::*,
+    timer::TimerGroup,
+    Delay,
+    Rtc,
+};
+use esp_backtrace as _;
+
+#[entry]
+fn main() -> ! {
+    let peripherals = Peripherals::take();
+    let mut system = peripherals.PCR.split();
+    let clocks = ClockControl::boot_defaults(system.clock_control).freeze();
+
+    // Disable the watchdog timers. For the ESP32-H2, this includes the Super WDT,
+    // and the TIMG WDTs.
+    let mut rtc = Rtc::new(peripherals.LP_CLKRST);
+    let timer_group0 = TimerGroup::new(
+        peripherals.TIMG0,
+        &clocks,
+        &mut system.peripheral_clock_control,
+    );
+    let mut wdt0 = timer_group0.wdt;
+    let timer_group1 = TimerGroup::new(
+        peripherals.TIMG1,
+        &clocks,
+        &mut system.peripheral_clock_control,
+    );
+    let mut wdt1 = timer_group1.wdt;
+
+    rtc.swd.disable();
+    rtc.rwdt.disable();
+    wdt0.disable();
+    wdt1.disable();
+
+    // Set LED GPIOs as an output.
+    let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
+    let led1 = io.pins.gpio3.into_push_pull_output();
+    let led2 = io.pins.gpio4.into_push_pull_output();
+    let led3 = io.pins.gpio5.into_push_pull_output();
+
+    // Set GPIO9 as an input.
+    let button = io.pins.gpio9.into_pull_down_input().degrade();
+
+    // You can use `into` or `degrade`
+    let mut pins = [led1.into(), led2.into(), led3.degrade()];
+
+    // Initialize the Delay peripheral, and use it to toggle the LED state in a
+    // loop.
+    let mut delay = Delay::new(&clocks);
+
+    loop {
+        toggle_pins(&mut pins, &button);
+        delay.delay_ms(500u32);
+    }
+}
+
+fn toggle_pins(leds: &mut [AnyPin<Output<PushPull>>], button: &AnyPin<Input<PullDown>>) {
+    for pin in leds.iter_mut() {
+        pin.toggle().unwrap();
+    }
+
+    if button.is_low().unwrap() {
+        esp_println::println!("Button");
+    }
+}

esp32s2-hal/examples/blinky_erased_pins.rs

@@ -34,15 +34,16 @@ fn main() -> ! {
     wdt.disable();
     rtc.rwdt.disable();
 
-    // Set GPIO4 as an output, and set its state high initially.
+    // Set LED GPIOs as an output.
     let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
     let led1 = io.pins.gpio3.into_push_pull_output();
     let led2 = io.pins.gpio4.into_push_pull_output();
     let led3 = io.pins.gpio5.into_push_pull_output();
 
+    // Set GPIO9 as an input.
     let button = io.pins.gpio0.into_pull_down_input().degrade();
 
-    // you can use `into` or `degrade`
+    // You can use `into` or `degrade`
     let mut pins = [led1.into(), led2.into(), led3.degrade()];
 
     // Initialize the Delay peripheral, and use it to toggle the LED state in a

esp32s3-hal/examples/blinky_erased_pins.rs

@@ -34,15 +34,16 @@ fn main() -> ! {
     wdt.disable();
     rtc.rwdt.disable();
 
-    // Set GPIO4 as an output, and set its state high initially.
+    // Set LED GPIOs as an output.
     let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
     let led1 = io.pins.gpio3.into_push_pull_output();
     let led2 = io.pins.gpio4.into_push_pull_output();
     let led3 = io.pins.gpio5.into_push_pull_output();
 
+    // Set GPIO9 as an input.
     let button = io.pins.gpio0.into_pull_down_input().degrade();
 
-    // you can use `into` or `degrade`
+    // You can use `into` or `degrade`
     let mut pins = [led1.into(), led2.into(), led3.degrade()];
 
     // Initialize the Delay peripheral, and use it to toggle the LED state in a