Fix typos in pallet-contracts

client/state-db/src/lib.rs

@@ -594,7 +594,7 @@ impl<BlockHash: Hash, Key: Hash, D: MetaDb> StateDb<BlockHash, Key, D> {
 	}
 
 	/// Prevents pruning of specified block and its descendants.
-	/// `hint` used for futher checking if the given block exists
+	/// `hint` used for further checking if the given block exists
 	pub fn pin<F>(&self, hash: &BlockHash, number: u64, hint: F) -> Result<(), PinError>
 	where
 		F: Fn() -> bool,
@@ -665,7 +665,7 @@ pub enum IsPruned {
 	Pruned,
 	/// Definitely not pruned
 	NotPruned,
-	/// May or may not pruned, need futher checking
+	/// May or may not pruned, need further checking
 	MaybePruned,
 }
 

frame/contracts/README.md

@@ -64,7 +64,7 @@ When setting up the `Schedule` for your runtime make sure to set `InstructionWei
 to a non zero value. The default is `0` and prevents the upload of any non deterministic code.
 
 An indeterministic code can be deployed on-chain by passing `Determinism::AllowIndeterministic`
-to `upload_code`. A determinstic contract can then delegate call into it if and only if it
+to `upload_code`. A deterministic contract can then delegate call into it if and only if it
 is ran by using `bare_call` and passing `Determinism::AllowIndeterministic` to it. **Never use
 this argument when the contract is called from an on-chain transaction.**
 

frame/contracts/primitives/src/lib.rs

@@ -131,7 +131,7 @@ pub struct InstantiateReturnValue<AccountId> {
 	pub account_id: AccountId,
 }
 
-/// The result of succesfully uploading a contract.
+/// The result of successfully uploading a contract.
 #[derive(PartialEq, Eq, Encode, Decode, RuntimeDebug, TypeInfo)]
 pub struct CodeUploadReturnValue<CodeHash, Balance> {
 	/// The key under which the new code is stored.
@@ -239,7 +239,7 @@ where
 		}
 	}
 
-	/// If the amount of deposit (this type) is constrained by a `limit` this calcuates how
+	/// If the amount of deposit (this type) is constrained by a `limit` this calculates how
 	/// much balance (if any) is still available from this limit.
 	///
 	/// # Note

frame/contracts/proc-macro/src/lib.rs

@@ -15,7 +15,7 @@
 // See the License for the specific language governing permissions and
 // limitations under the License.
 
-//! Procedural macroses used in the contracts module.
+//! Procedural macros used in the contracts module.
 //!
 //! Most likely you should use the [`#[define_env]`][`macro@define_env`] attribute macro which hides
 //! boilerplate of defining external environment for a wasm module.
@@ -527,7 +527,7 @@ fn expand_docs(def: &EnvDef) -> TokenStream2 {
 	}
 }
 
-/// Expands environment definiton.
+/// Expands environment definition.
 /// Should generate source code for:
 ///  - implementations of the host functions to be added to the wasm runtime environment (see
 ///    `expand_impls()`).
@@ -778,7 +778,7 @@ fn expand_functions(def: &EnvDef, expand_blocks: bool, host_state: TokenStream2)
 #[proc_macro_attribute]
 pub fn define_env(attr: TokenStream, item: TokenStream) -> TokenStream {
 	if !attr.is_empty() && !(attr.to_string() == "doc".to_string()) {
-		let msg = r#"Invalid `define_env` attribute macro: expected either no attributes or a single `doc` attibute:
+		let msg = r#"Invalid `define_env` attribute macro: expected either no attributes or a single `doc` attribute:
 					 - `#[define_env]`
 					 - `#[define_env(doc)]`"#;
 		let span = TokenStream2::from(attr).span();

frame/contracts/src/address.rs

@@ -32,7 +32,7 @@ use sp_runtime::traits::{Hash, TrailingZeroInput};
 pub trait AddressGenerator<T: Config> {
 	/// The address of a contract based on the given instantiate parameters.
 	///
-	/// Changing the formular for an already deployed chain is fine as long as no collisons
+	/// Changing the formular for an already deployed chain is fine as long as no collisions
 	/// with the old formular. Changes only affect existing contracts.
 	fn contract_address(
 		deploying_address: &T::AccountId,

frame/contracts/src/benchmarking/code.rs

@@ -39,7 +39,7 @@ use wasm_instrument::{
 	},
 };
 
-/// The location where to put the genrated code.
+/// The location where to put the generated code.
 pub enum Location {
 	/// Generate all code into the `call` exported function.
 	Call,

frame/contracts/src/benchmarking/mod.rs

@@ -355,7 +355,7 @@ benchmarks! {
 	}: _(origin, callee, value, Weight::MAX, None, data)
 	verify {
 		let deposit = T::Currency::free_balance(&deposit_account);
-		// value and value transfered via call should be removed from the caller
+		// value and value transferred via call should be removed from the caller
 		assert_eq!(
 			T::Currency::free_balance(&instance.caller),
 			caller_funding::<T>() - instance.value - value - deposit - Pallet::<T>::min_balance(),
@@ -2224,7 +2224,7 @@ benchmarks! {
 	// the same amount of time. We follow that `t.load` and `drop` both have the weight
 	// of this benchmark / 2. We need to make this assumption because there is no way
 	// to measure them on their own using a valid wasm module. We need their individual
-	// values to derive the weight of individual instructions (by substraction) from
+	// values to derive the weight of individual instructions (by subtraction) from
 	// benchmarks that include those for parameter pushing and return type dropping.
 	// We call the weight of `t.load` and `drop`: `w_param`.
 	// The weight that would result from the respective benchmark we call: `w_bench`.
@@ -3003,9 +3003,9 @@ benchmarks! {
 		sbox.invoke();
 	}
 
-	// This is no benchmark. It merely exist to have an easy way to pretty print the curently
+	// This is no benchmark. It merely exist to have an easy way to pretty print the currently
 	// configured `Schedule` during benchmark development.
-	// It can be outputed using the following command:
+	// It can be outputted using the following command:
 	// cargo run --manifest-path=bin/node/cli/Cargo.toml \
 	//     --features runtime-benchmarks -- benchmark pallet --extra --dev --execution=native \
 	//     -p pallet_contracts -e print_schedule --no-median-slopes --no-min-squares

frame/contracts/src/chain_extension.rs

@@ -138,7 +138,7 @@ pub trait ChainExtension<C: Config> {
 ///
 /// # Note
 ///
-/// Currently, we support tuples of up to ten registred chain extensions. If more chain extensions
+/// Currently, we support tuples of up to ten registered chain extensions. If more chain extensions
 /// are needed consider opening an issue.
 pub trait RegisteredChainExtension<C: Config>: ChainExtension<C> {
 	/// The extensions globally unique identifier.

frame/contracts/src/exec.rs

@@ -84,14 +84,14 @@ where
 pub enum ErrorOrigin {
 	/// Caller error origin.
 	///
-	/// The error happened in the current exeuction context rather than in the one
+	/// The error happened in the current execution context rather than in the one
 	/// of the contract that is called into.
 	Caller,
 	/// The error happened during execution of the called contract.
 	Callee,
 }
 
-/// Error returned by contract exection.
+/// Error returned by contract execution.
 #[cfg_attr(test, derive(Debug, PartialEq))]
 pub struct ExecError {
 	/// The reason why the execution failed.
@@ -2455,7 +2455,7 @@ mod tests {
 	#[test]
 	fn in_memory_changes_not_discarded() {
 		// Call stack: BOB -> CHARLIE (trap) -> BOB' (success)
-		// This tests verfies some edge case of the contract info cache:
+		// This tests verifies some edge case of the contract info cache:
 		// We change some value in our contract info before calling into a contract
 		// that calls into ourself. This triggers a case where BOBs contract info
 		// is written to storage and invalidated by the successful execution of BOB'.
@@ -3405,7 +3405,7 @@ mod tests {
 		let code_hash = MockLoader::insert(Call, move |ctx, _| {
 			// It is set to one when this contract was instantiated by `place_contract`
 			assert_eq!(ctx.ext.nonce(), 1);
-			// Should not change without any instantation in-between
+			// Should not change without any instantiation in-between
 			assert_eq!(ctx.ext.nonce(), 1);
 			// Should not change with a failed instantiation
 			assert_err!(
@@ -3416,7 +3416,7 @@ mod tests {
 				}
 			);
 			assert_eq!(ctx.ext.nonce(), 1);
-			// Successful instantation increments
+			// Successful instantiation increments
 			ctx.ext.instantiate(Weight::zero(), success_code, 0, vec![], &[]).unwrap();
 			assert_eq!(ctx.ext.nonce(), 2);
 			exec_success()

frame/contracts/src/lib.rs

@@ -403,7 +403,7 @@ pub mod pallet {
 				T::MaxCodeLen::get(),
 			);
 
-			// Debug buffer should at least be large enough to accomodate a simple error message
+			// Debug buffer should at least be large enough to accommodate a simple error message
 			const MIN_DEBUG_BUF_SIZE: u32 = 256;
 			assert!(
 				T::MaxDebugBufferLen::get() > MIN_DEBUG_BUF_SIZE,
@@ -891,7 +891,7 @@ pub mod pallet {
 		/// The contract's code was found to be invalid during validation or instrumentation.
 		///
 		/// The most likely cause of this is that an API was used which is not supported by the
-		/// node. This hapens if an older node is used with a new version of ink!. Try updating
+		/// node. This happens if an older node is used with a new version of ink!. Try updating
 		/// your node to the newest available version.
 		///
 		/// A more detailed error can be found on the node console if debug messages are enabled
@@ -987,7 +987,7 @@ struct InternalOutput<T: Config, O> {
 	result: Result<O, ExecError>,
 }
 
-/// Helper trait to wrap contract execution entry points into a signle function
+/// Helper trait to wrap contract execution entry points into a single function
 /// [`Invokable::run_guarded`].
 trait Invokable<T: Config> {
 	/// What is returned as a result of a successful invocation.

frame/contracts/src/storage/meter.rs

@@ -513,7 +513,7 @@ impl<T: Config> Ext<T> for ReservingExt {
 			// we make sure to leave at least the ed in the free balance.
 			//
 			// The sender always has enough balance because we track it in the `ContractInfo` and
-			// never send more back than we have. Noone has access to the deposit account. Hence no
+			// never send more back than we have. No one has access to the deposit account. Hence no
 			// other interaction with this account takes place.
 			Deposit::Refund(amount) => {
 				if terminated {

frame/contracts/src/wasm/mod.rs

@@ -186,7 +186,7 @@ impl<T: Config> PrefabWasmModule<T> {
 		code_cache::try_remove::<T>(origin, code_hash)
 	}
 
-	/// Returns whether there is a deposit to be payed for this module.
+	/// Returns whether there is a deposit to be paid for this module.
 	///
 	/// Returns `0` if the module is already in storage and hence no deposit will
 	/// be charged when storing it.
@@ -689,7 +689,7 @@ mod tests {
 		executable.execute(ext.borrow_mut(), entry_point, input_data)
 	}
 
-	/// Execute the suppplied code.
+	/// Execute the supplied code.
 	fn execute<E: BorrowMut<MockExt>>(wat: &str, input_data: Vec<u8>, ext: E) -> ExecResult {
 		execute_internal(wat, input_data, ext, &ExportedFunction::Call, true, false)
 	}

frame/contracts/src/wasm/prepare.rs

@@ -50,7 +50,7 @@ pub enum TryInstantiate {
 	Instantiate,
 	/// Skip the instantiation during preparation.
 	///
-	/// This makes sense when the preparation takes place as part of an instantation. Then
+	/// This makes sense when the preparation takes place as part of an instantiation. Then
 	/// this instantiation would fail the whole transaction and an extra check is not
 	/// necessary.
 	Skip,
@@ -376,7 +376,7 @@ fn get_memory_limits<T: Config>(
 			},
 		}
 	} else {
-		// If none memory imported then just crate an empty placeholder.
+		// If none memory imported then just create an empty placeholder.
 		// Any access to it will lead to out of bounds trap.
 		Ok((0, 0))
 	}
@@ -412,7 +412,7 @@ where
 		extended_const: false,
 		component_model: false,
 		// This is not our only defense: We check for float types later in the preparation
-		// process. Additionally, all instructions explictily  need to have weights assigned
+		// process. Additionally, all instructions explicitly  need to have weights assigned
 		// or the deployment will fail. We have none assigned for float instructions.
 		deterministic_only: matches!(determinism, Determinism::Deterministic),
 		mutable_global: false,

frame/contracts/src/wasm/runtime.rs

@@ -1336,7 +1336,7 @@ pub mod env {
 	///
 	/// # Parameters
 	///
-	/// - `flags`: See `crate::wasm::runtime::CallFlags` for a documenation of the supported flags.
+	/// - `flags`: See `crate::wasm::runtime::CallFlags` for a documentation of the supported flags.
 	/// - `callee_ptr`: a pointer to the address of the callee contract. Should be decodable as an
 	///   `T::AccountId`. Traps otherwise.
 	/// - `gas`: how much gas to devote to the execution.
@@ -2038,7 +2038,7 @@ pub mod env {
 	/// # Note
 	///
 	/// The state rent functionality was removed. This is stub only exists for
-	/// backwards compatiblity
+	/// backwards compatibility
 	#[prefixed_alias]
 	#[deprecated]
 	fn restore_to(
@@ -2062,7 +2062,7 @@ pub mod env {
 	/// # Note
 	///
 	/// The state rent functionality was removed. This is stub only exists for
-	/// backwards compatiblity
+	/// backwards compatibility
 	#[version(1)]
 	#[prefixed_alias]
 	#[deprecated]
@@ -2084,7 +2084,7 @@ pub mod env {
 	/// # Note
 	///
 	/// The state rent functionality was removed. This is stub only exists for
-	/// backwards compatiblity.
+	/// backwards compatibility.
 	#[prefixed_alias]
 	#[deprecated]
 	fn set_rent_allowance(
@@ -2102,7 +2102,7 @@ pub mod env {
 	/// # Note
 	///
 	/// The state rent functionality was removed. This is stub only exists for
-	/// backwards compatiblity.
+	/// backwards compatibility.
 	#[version(1)]
 	#[prefixed_alias]
 	#[deprecated]
@@ -2116,7 +2116,7 @@ pub mod env {
 	/// # Note
 	///
 	/// The state rent functionality was removed. This is stub only exists for
-	/// backwards compatiblity.
+	/// backwards compatibility.
 	#[prefixed_alias]
 	#[deprecated]
 	fn rent_allowance(ctx: _, memory: _, out_ptr: u32, out_len_ptr: u32) -> Result<(), TrapReason> {
@@ -2409,7 +2409,7 @@ pub mod env {
 	///
 	/// # Return Value
 	///
-	/// Returns `ReturnCode::Success` when the dispatchable was succesfully executed and
+	/// Returns `ReturnCode::Success` when the dispatchable was successfully executed and
 	/// returned `Ok`. When the dispatchable was exeuted but returned an error
 	/// `ReturnCode::CallRuntimeFailed` is returned. The full error is not
 	/// provided because it is not guaranteed to be stable.
@@ -2603,7 +2603,7 @@ pub mod env {
 
 	/// Returns a nonce that is unique per contract instantiation.
 	///
-	/// The nonce is incremented for each succesful contract instantiation. This is a
+	/// The nonce is incremented for each successful contract instantiation. This is a
 	/// sensible default salt for contract instantiations.
 	#[unstable]
 	fn instantiation_nonce(ctx: _, _memory: _) -> Result<u64, TrapReason> {