Checklist
Additionally (if applicable):
Issue description
Using Rufus 4.10 to write Alma linux 9.5 and 9.6 to an USB stick.
Download required Grub
But there is only a close button.
Using Rufus 4.9 The Download request window contains all the buttons as expected.
In 4.10 the buttons are missing.
Log
Rufus x64 v4.10.2279 (Portable)
Windows version: Windows 11 Pro x64 (Build 26100.6584)
Syslinux versions: 4.07/2013-07-25, 6.04/pre1
Grub versions: 0.4.6a, 2.12
System locale ID: 0x0809 (en-GB)
Will use default UI locale 0x0809
SetLGP: Successfully set NoDriveTypeAutorun policy to 0x0000009E
Localization set to 'en-US'
Found USB 2.0 device 'Kingston DataTraveler 3.0 USB Device' (0951:1666)
NOTE: This device is a USB 3.0 device operating at lower speed...
Using 'autorun.inf' label for drive D: 'AlmaLinux-9-6-x86_64-dvd'
1 device found
Disk type: Removable, Disk size: 32 GB, Sector size: 512 bytes
Cylinders: 3763, Tracks per cylinder: 255, Sectors per track: 63
Partition type: MBR, NB Partitions: 1
Disk ID: 0x0068B8F5
Drive has a Syslinux Master Boot Record
Partition 1:
Type: FAT32 LBA (0x0c)
Detected File System: FAT32
Size: 28.8 GB (30956339200 bytes)
Start Sector: 2048, Boot: Yes
Found 5 additional UEFI revocation filters from remote SBAT
Found 4 active Secure Boot certificate entries from remote
Found 1 revoked Secure Boot certificate entries from remote
Scanning image...
ISO analysis:
Image is an ISO9660 image
Will use '/isolinux/isolinux.cfg' for Syslinux
Detected Syslinux version: 6.04 (from '/isolinux/isolinux.bin')
Detected Shim version: 15.8 (from '/EFI/BOOT/BOOTX64.EFI')
Detected GRUB version: 2.06 (from '/EFI/BOOT/grubx64.efi')
Supported GRUB filesystems: ext2, f2fs, fat, iso9660, xfs
Disk image analysis:
Image has an unknown Master Boot Record
Image is a bootable disk image
UEFI bootloaders analysis:
• /EFI/BOOT/BOOTX64.EFI*
Signed by 'Microsoft Corporation UEFI CA 2011'
Note: This bootloader may fail Secure Boot validation on *some* systems,
unless you enable "Microsoft 3rd-party UEFI CA" in your 'BIOS'.
• /EFI/BOOT/grubx64.efi
Signed by 'Sectigo Public Code Signing CA EV R36'
• /EFI/BOOT/mmx64.efi
Signed by 'Sectigo Public Code Signing CA EV R36'
ISO label: 'AlmaLinux-9-5-x86_64-dvd'
Size: 10.8 GB (Projected)
Note: File on disk is larger than reported ISO size by 262 KB...
Has a >64 chars filename
Uses: Syslinux/Isolinux v6.04
Uses: GRUB2 (2.06-gdie-almalinux-9-5)
Uses: EFI
Using image: AlmaLinux-9.5-x86_64-dvd.iso (10.6 GB)
Downloading https://rufus.ie/files/syslinux-6.04/ldlinux.sys
File length: 66.5 KB
Successfully downloaded 'ldlinux.sys'
Download signature is valid ✓
Downloading https://rufus.ie/files/syslinux-6.04/ldlinux.bss
File length: 512 bytes
Successfully downloaded 'ldlinux.bss'
Download signature is valid ✓
Checklist
<FULL LOG>below.Rufus version: x.y.z- I have NOT removed any part of it.Additionally (if applicable):
(✓)button to compute the MD5, SHA1 and SHA256 checksums, which are therefore present in the log I copied. I confirmed, by performing an internet search, that these values match the ones from the official image.Issue description
Using Rufus 4.10 to write Alma linux 9.5 and 9.6 to an USB stick.
Download required Grub
But there is only a close button.
Using Rufus 4.9 The Download request window contains all the buttons as expected.
In 4.10 the buttons are missing.
Log